, MachineryChina

Shaper machine

A shaper machine is a type of machine tool that uses linear relative motion between the workpiece and a single-point cutting tool to machine a linear toolpath. Its cut is analogous to that of a lathe, except that it is linear instead of helical. A shaper is analogous to a planer, but smaller, and with the cutter riding a ram that moves above a stationary workpiece, rather than the entire workpiece moving beneath the cutter. The ram is moved back and forth typically by a crank inside the column; hydraulically actuated shapers also exist.

Shapers are mainly classified as
standard, draw-cut, horizontal, universal, vertical, geared, crank,
hydraulic, contour and traveling head. The horizontal arrangement is the
most common. Vertical shapers are generally fitted with a rotary table
to enable curved surfaces to be machined. The vertical shaper is
essentially the same thing as a slotter (slotting machine), although
technically a distinction can be made if one defines a true vertical
shaper as a machine whose slide can be moved from the vertical. A
slotter is fixed in the vertical plane.

Very small machines have been successfully made to operate by hand
power. As size increases, the mass of the machine and its the power
requirements increase, and it becomes necessary to use a motor or other
supply of mechanical power. This motor drives a mechanical arrangement
(using a pinion gear, bull gear, and crank, or a chain over sprockets)
or a hydraulic motor that supplies the necessary movement via hydraulic

Shanghai Ying Ji Machinery Trading Co., LTD. (YJMT) is a specially authorized foreign trade corporation. The corporation’s main business is machinery export, include construction machinery, crane machinery, mining machinery, special doors, beauty equipment etc. We supplies Shaper machine for sale and we have exported Shaper machine to many countries.

Contact E-Mail : [email protected]

You may also like


Leave a reply

Your email address will not be published. Required fields are marked *